Installation and care
Careful installation and the right care keep your Nuevabaño products in good condition and protect their warranty. Choose your product family.
-
LED mirrors: installation and care The Luz Round and Luz Square backlit LED mirrors are wall-mounted and connected to the mains. The connection is a job for a qualified electrician. Read the guide -
Wall-hung toilets: installation and care The Vega Square and Vega Round wall-hung toilets are installed on a concealed frame. Here are the installation steps and the care routine that keep the ceramic and the soft-close seat in good condition. Read the guide -
Countertop basins: installation and care The Evona and Felis countertop basins sit on a worktop or vanity unit. The waste and trap are not supplied. Read the guide -
Bathtubs: installation and care The Torino freestanding bathtub and the Torino Muro back-to-wall bathtub are made of seamless acrylic, with waste and overflow included in a central position. Read the guide -
Walk-in shower screens: installation and care The Aire Walk-In shower screen combines a 6 mm tempered glass panel, a chrome aluminium wall profile and a stainless steel support bar. The tray and taps are not included. Read the guide -
Shower doors and enclosures: installation and care The Corsa sliding door fits in a recess or, with its side panel, in a corner, and the Corsa 80 × 80 enclosure fits in a corner. Tempered glass 6 mm, chrome aluminium frame, double rollers top and bottom. Read the guide
Common rules
- Have the products installed by a qualified professional, following local building rules.
- Inspect each product when you unpack it, before installation: report any visible defect before fitting.
- Clean with a soft cloth or non-abrasive sponge, water and a mild detergent, then rinse and dry.
- Deal with limescale early and often: drying surfaces quickly prevents most deposits.
- Avoid scouring powders and pads, steel wool and solvents. Never mix a descaler with bleach.